Wiring Driver

Wiring Servo Drivers with AC Power

To wire servo drivers with AC power, follow these basic steps:

1. Safety First: Ensure all power is off before starting. Use appropriate safety gear and tools.

2. Gather Materials:

   • Servo driver

   • AC power supply cord

   • Screwdrivers

   • Wire cutters and strippers

   • Electrical tape

3. Identify Connections:

   • Refer to the servo driver's manual for terminal identification (usually L, N, and PE/G).

4. Connect Wires:

   • Live Wire (L): Connect the live wire from the power supply to the "L" terminal on the driver.

   • Neutral Wire (N): Connect the neutral wire to the "N" terminal.

   • Ground/Earth Wire (PE/G): Attach the ground wire to the "PE" or "G" terminal for safety.

5. Secure Connections:

   • Use screwdrivers to tighten all connections.

   • Ensure no exposed wires and wrap any open sections with electrical tape.

6. Test the Setup:

   • Double-check all connections before powering on.

   • Verify functionality with a multimeter if necessary.

7. Power On:

   • Turn on the power supply and test the servo motor response to commands.

Note: Always consult a professional if unsure about electrical installations.

please check the manuals for the aasd drivers here: https://github.com/motion4sim/AASD15A-Servo-Controller-for-Motion-Simrigs/tree/master/user-guide/AASD-Manuals